The Sennheiser EW100 G2 system allows for easy to use, streamlined connectivity and high quality audio/video production. The EW100 G2 provides musicians and audio/visual workers with an integrated transmitter/receiver arrangement. Learning to use the EW100 G2 may seem daunting, but Sennheiser designed the system to be highly compatible and simple to use. Knowing the button mode on one device allows you to use the other components: the Set button acts as the accept button, the Power button acts as the back or cancel button and the up/down arrows allow you to scroll.

There you can also view an animated instruction manual. Other hazards. • Refer all servicing to qualified service personnel. Servicing is. The SKM 100 G3 radio microphone is part of the evolution wireless series. W G3/ w G2 w G3/ w G2. SKM 100 Set w 135 This system is ideal for vocal applications. Set ew 135 consists of: EM 100 receiver, SKM 100 hand-held transmitter with MD 835 cardioid dynamic microphone module, plug-in mains unit, battery, antennas, microphone clamp and operating manual. Set w 135-p Having the same transmitter as the Set ew 135, this system replaces the.

7 Set the sensitivity of the transmitter by going to 'Sensit' within the operating menu. Toggle between the sensitivity numbers.

The proper sensitivity for someone talking is between -10 and -20. The louder the sound is that you are recording, the greater (positive number) the sensitivity setting should be. The sensitivity display should only peak during an event's loudest moment; the average sound level should be right in the middle of the sensitivity meter. Once the sensitivity bar is adjusted correctly, press 'Set.'

• EM 100 G2 EM 300 G2 EM 500 G2 Short Description The three stationary receivers EM 100 G2, EM 300 G2 and EM 500 G2 ’ True Diversity receivers and are equipped with the HDX noise reduction system. Each receiver has a switching bandwidth of 36MHz in the UHF band. • If not observed the adaptor is legally liable for possible results of damage. Repairs/exchanges The following instructions for overhaul and testing must be followed. In case of unusual problems please contact your Sennheiser distributor. EM 500 G2, EM 300 G2, EM 100 G2 2/. Image dreambox 800 hd clone images.

• Interconnector assignmet..27 Mainboard, component side.28 Mainboard, solder side..29 RF board, component side..30 RF board, solder side..31 Monitoring module: MOD.A020, component side.32 Monitoring module: MOD.A020, solder side.32 EM 500 G2, EM 300 G2, EM 100 G2 3/. • Audio output jack socket (AF OUT UNBAL) ¸ RJ45 socket as service interface (DATA) ¹ BNC socket as antenna input 2 (ANT II) Type plate BNC socket, antenna input 1 (ANT I) EM 100 G2, EM 300 G2, EM 500 G2 08/2004 4/32. • EM 300 G2 68dB __________________________ ≥ EM 500 G2 70dB Intermodulation attenuation ≥ EM 100 G2 _____________________ 65dB __________________________ ≥ EM 300 G2 68dB __________________________ ≥ EM 500 G2 70dB EM 100 G2, EM 300 G2, EM 500 G2 08/2004. • Monitor output level/load _______________> 100mW/32 (only EM 500 G2 ' ______________________¼ AF outputs (6.3mm) jack socket Unbalanced XLR-3M, balanced Pilot tone Pilot tone frequency ______________32.768kHz ≥ Pilot tone deviation _______________ 1.5kHz EM 100 G2, EM 300 G2, EM 500 G2 08/2004 6/32. • AF signal is weakened by approx. From the two outputs, the AF signal then reaches across various components to protect from ESD parasitic signals and phantom voltage at AF sockets P175 and J175.